The printer should printout the result.Look for "Print" section, press the "EEPROM' button, select "Rear Tray" and pres "OK" button.Press the "Platen" button located beside the "Main" button.Look for "Clear Ink Counter" section, press the "Main" button and wait for the message "A function was finished" and then press "OK" button.Insert some A4 paper, the printer will print the result.Open the mp287.exe, and then follow this step. Second STEP : Reset Canon PIMA MP287 Using Resetter. When the printer entered the Service Mode, all LED will stop blinking.Keep holding the power button, now release the RESUME button and then press the RESUME button for 5 times and quickly release the POWER button.Press and hold the RESUME button ( Green button), keep holding it and then press the power button, do not let go yet.Turn off the printer without pulling the power cord.To do that, follow this step, it's so easy. Click this link to read more.First Step : Set The Canon PIXMA MP287 To Service Mode. We will be retiring the legacy profile avatars on. : New firmware version 1.6.1 is available for EOS-1DX Mark III : New firmware version 1.0.3.1 is available for EOS-C70 : New firmware version 1.0.1.1 is available for EOS R5 C : We are excited to announce that we have refreshed the ranking scale within the community! : Keep your Canon gear in optimal condition with a Canon Maintenance Service : New firmware version 1.0.3.1 is available for EOS-C300 Mark III : New firmware version 1.0.5.1 is available for EOS-C500 Mark II : New firmware version 1.0.3 is available for EOS M50 Mark II : New firmware version 1.3.2 is available for PowerShot G7 X Mark III
: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down : New firmware version 1.3.0 is available for PowerShot PICK : New firmware version 1.0.1 is available for CR-X300 : New firmware version 1.1.0 is available for EOS-R10 : New firmware version 1.1.0 is available for EOS-R7 : New firmware version 1.6.0 is available for EOS-R6 : New firmware version 1.6.0 is available for EOS-R5 : New firmware version 1.2.1 is available for EOS-R3 : New firmware version 1.2.0 is available for CR-N 500 : New firmware version 1.2.0 is available for CR-N 300 : New firmware version 1.1.1 is available for RF 70-200mm L IS USM : New firmware version 1.0.4.1 is available for EOS C70 This policy is basically outrageous and I really cannot envisage EVER buying another Canon product. As far as I can see it's like buying a new car and then when the spark plugs or the tires need replacement, you are told to buy a new car and scrap the old one! I want to know how Canon have the nerve to sell a product that effectively has a finite life without telling the customer. What are the costs to the environment of this policy? In this day and age to use built-in obsolescence as a means of increasing your income stream is really not acceptable.
#SERVICE MANUAL CANON MP250 HOW TO#
The manual doesn't even say how to get around the 85% issue. When this occurs, the manual I have simply says to contact the service center, not "Your printer is scrap". Looking at this forum (and elsewhere on line) it is clear that this is a recurring issue on almost all Canon printers. However, they were quite clear that one day soon it will reach 100% at which stage my printer has to be returned to Canon at great expense to fix this, and that I might as well buy a new one as it would be cheaper. I spoke to Canon Support who told me that the first time you get this it means it is 85% full, and told me how to overcome this. The ink absorber on my Canon MG2950 is, it says, almost full.
0 kommentar(er)
